Full Balance Headphone Amp.@modelSOU@@24.March.2018 Update
Please pay in advance. (I will start making
after payment is completed)
Shipping cost by EMS or Fedex including shipping insurance is include.
Tax is not include.You need pay tax when you received
I will charge you an additional fee if you would like my delivery.
model406@2,000,000JPY(Sales price for oversea. Tax is not include.)
model406S-002 Flying Dragon II@2,700,000JPY
model406S-002 Flying Dragon II
This model406 adopts the independent left and right power, twin balance monaural.
A clean, stress-free sound that does not feel the presence of the amp is a sound appropriate for a flagship model.
The output of this amplifier is balanced output 3.5 W + 3.5 W (32 Ά load).
Input is XLR 3 pin balance only. (Reference input level + 4 dBm / - 10 dBm selectable)
Balanced output will not be obtained if a device with unbalanced output is connected. be careful.
Order acceptance of this time Once you have sold out a limited number will be terminated.
model406S shipping only by Fedex.
But I'm sorry I can't make fake invoice in any case.
The price of model406-006 , 007 is 2,000,000 JPY and model406S-002 is 2,700,000 JPY not include tax and I will not give any discount.
Please refer to the notice for the delivery fee.
Serial numbers are attached from No. 001 on
front and rear panel in order by order.
I can't never undertake any special orders for serial numbers.
It will be ordered when the price is paid in
full with derivery fee.
It can not be canceled because it is made to order.
It will be delivered 2 to 4 months after receiving the order
< Delivery Fee by Masuda >
East Asia: 200,000 JPY or more
Southeast Asia : 300,000 JPY or more
Oceania : 400,000 JPY or more
Europe, North America : 500,000 JPY or more
Pickup in Tokyo : Free
Model : Full Balanced Stereo headphone amp
Input : Electronically Balanced = XLR3 x2
Output : Balance = XLR4-31 x 1 or XLR3-31 x 2(L,R) , Unbalance = Σ6.3 TRS
Input Impedance : 3.7kΆ (XLR)
Reference Input Level : +4dBm/-10dBm (Selectable)
Maximum Input Level : +30dBm
Maximum Output Level (P-P) : Balance = 32V (with 30Ά loaded, 1kHz, THD+N 0.05%)Unbalance = 22V (with 30Ά loaded, 1kHz, THD+N 0.05%)
@@@@@@@@@@@@@@ (RMS): Balance = 10.7V (with 30Ά loaded, 1kHz, THD+N 0.05%) Unbalance = 7.4V (with 30Ά loaded, 1kHz, THD+N 0.05%)
Maximum Output without Distortion : Balance = 3.8W+3.8W , Unbalance =1.8W+1.8W (with 32 ohm load, 1kHz, THD+N 0.05%)
Frequency Characteristics : 10Hz - 100kHz (-0.5dB) , 17Hz-50KHz(-0.2dBm)
Power Supply : AC100 - 240V, 50/60Hz Electric Energy Consumption : 0.9A (with AC100V)
Size : 330mmW x 247mmD x 104mmH (Knob, projecting part of connector not included )
Weight : 6.1kg (without the power cable)
¦Design or specifications may change due to improvement.